Visualizza wikitesto di Compensazione Termica in Arco

[[it:Compensazione Termica in Arco]]

== Setting the Manual Thermal Compensation ==
The Manual Thermal Compensation needs to be configured in Arco Control Panel, precisely, 2 settings shall be done:

* In the ''Machine'' group, click on the ''Axis Setup'' button and set to correct expansion coefficient for each axis in the frame ''Thermal Expansion Coefficients''.<br />
* In the ''Advanced'' group, open the ''Compensation'' tab and set to ''Manual'' the ''Thermal Compensation'' combo Box.<br />
* Save the Setting before Exit and tart Arco.<br />

<gallery>
File:ThermalManual1.jpg|
File:ThermalManual2.png|
</gallery>


== Setting the Automatic Thermal Compensation ==
The Automatic Thermal Compensation needs to be configured in Arco Control Panel, precisely, 2 settings shall be done:

* In the ''Machine'' group, click on the ''Axis Setup'' button and set to correct expansion coefficient for each axis in the frame ''Thermal Expansion Coefficients''.<br />
* Define the type on connection in the ''Connected To''
* Select the appropriate ''Probes Characterization File'' (the default file it is defined [[Thermal Default File|here]]).
* Save the Setting before Exit and tart Arco.<br />

<gallery>
File:ThermalAuto1.png|
File:ThermalAuto2.PNG|
</gallery>

== Using the Manual Thermal Compensation ==
From the ''Option'' panel, it is necessary to enable the thermal compensation of the Axis, Part or Both.<br />
* In case the part compensation is to enabled, then the expansion coefficient of the material to be used shall be define in or the send to the program the correct value.<br/>
* In the menu ''System'' of Arco,  it necessary to seto the current temperature.<br/> 
'''Since it a manual thermal compensation, it is responsibility of the user to set the correct values!'''<br/>
<gallery>
File:ActivateThermal.jpg|
File:ThermalManual3.jpg|
</gallery>

== Using the Automatic Thermal Compensation ==
From the ''Option'' panel, it is necessary to enable the thermal compensation of the Axis, Part or Both.<br />
* In case the part compensation is to enabled, then the expansion coefficient of the material to be used shall be define in or the send to the program the correct value.<br/>
* In of multiple probes for the part, is it necessary to set which probe is to be used, or in case of the need of an average value, both probes.<br/> 
* The value used for the thermal compensation are taken directly from the hardware and shown in the DRO.<br/> 
<gallery>
File:ActivateThermal.jpg|
</gallery>

[[it:Compensazione termica ad Arco]]
[[zh-cn:Arco的热补偿]]
[[pt:Compensação térmica em Arco]]
[[de:Thermische Kompensation in Arco]]
[[es:Compensación térmica en Arco]]
[[en:Thermal Compensation in Arco]]