Calibrazione della sonda del disco

It is possible to calibrate DISK probe using the Calibration Wizard.
The implementation at version 3.6 requires a manual modification of the program in order to have the disk calibrated.
The procedure to be followed is:

Create a calibration Wizard of the disk probe selecting the graphical definition and all the required angles to be calibrated.
The Wizard creates a standard definition of the probe, without any definition of the disk, that shall be add manually
In order define the disk probe it is necessary to add, as last parameter on each disk definition, the following code ,DISK,height where height represent the height of the disk
Consider, for a good calibration to let the sphere to be measure with at least 9 points